Aluminum Light Music Stand With Bag Black

Doesn't fit in a backpack when folded (could be fixed if the top section were removable) and can't be adjusted as to where the legs of the stand point. Won't be using it much.

Aluminum Light Music Stand With Bag Black

Excellent!

This is an exceedingly nice music stand. At 1 pound 14 oz (stand and case), it's very light yet sturdy. Folded up, the stand is 23 inches long, so not quite as compact as I would have liked. The only reason I didn't give it 5 stars is because the usage instructions are so poorly written. Like the previous reviewer, I couldn't get the button mechanism to allow me to tilt the desk portion into the proper position. Turns out, one needs to put pressure on the button relative to the vertical tube, not try to compress the button mechanism straight across. In other words, grab the tube of the stand just below the desk portion and button mechanism, extend thumb up without moving fingers, then push on button - should release the ratchet.
Unfolding and refolding the desk portion can be a bit tricky. The instructions state “spread out a panel.” Not useful at all, so here is what you need to do. Each side of the desk has 3 parts: a tray, a pair of 9-inch slats, riveted together, and a pair of 6-inch slats, also riveted together. If not already in the up position, raise the 2 pairs of 9-inch slats to vertical. The distance from the base of the tray to the top of the slats should be about 17 inches. Leave the 6-inch slats down beside the tray. Now fold out the tray by rotating the tops of the two tray halves away from each other. The 6-inch slats become the diagonals of the desk.
Refolding the stand is the reverse of unfolding it. Push down on the center pivot points of the diagonals. This motion causes the trays to start moving together. Push the trays all the way together. At this point, the 9-inch slats should be pointing straight up and may be left in that position. Use the button mechanism to fold the desk portion of the stand back down to lie parallel to the vertical tubes.
Remember, don’t force anything!

This is an exceedingly nice music stand. At 1 pound 14 oz (stand and case), it's very light yet sturdy. Folded up, the stand is 23 inches long, so not quite as compact as I would have liked. The only reason I didn't give it 5 stars is because the usage instructions are so poorly written. Like the previous reviewer, I couldn't get the button mechanism to allow me to tilt the desk portion into the proper position. Turns out, one needs to put pressure on the button relative to the vertical tube, not try to compress the button mechanism straight across. In other words, grab the tube of the stand just below the desk portion and button mechanism, extend thumb up without moving fingers, then push on button - should release the ratchet.
Unfolding and refolding the desk portion can be a bit tricky. The instructions state ìspread out a panel.î Not useful at all, so here is what you need to do. Each side of the desk has 3 parts: a tray, a pair of 9-inch slats, riveted together, and a pair of 6-inch slats, also riveted together. If not already in the up position, raise the 2 pairs of 9-inch slats to vertical. The distance from the base of the tray to the top of the slats should be about 17 inches. Leave the 6-inch slats down beside the tray. Now fold out the tray by rotating the tops of the two tray halves away from each other. The 6-inch slats become the diagonals of the desk.
Refolding the stand is the reverse of unfolding it. Push down on the center pivot points of the diagonals. This motion causes the trays to start moving together. Push the trays all the way together. At this point, the 9-inch slats should be pointing straight up and may be left in that position. Use the button mechanism to fold the desk portion of the stand back down to lie parallel to the vertical tubes.
Remember, donít force anything!

It is very light yet very strong & stabile, can be easily adjusted to violin player. Wide & deep providing a lot of space for music sheets without falling of.