IMPORTANT: Most instrument replacement parts are not intended to be installed by the customer; they MUST be installed by a trained luthier. SHAR cannot assume any liability for damage that may be caused by improper installation of replacement parts.
Made in France by Aubert, these bridges are cut to accommodate most instruments of the selected size. The hinged feet adjust to the contour of the top plate of the instrument. A standard height is is cut, the thickness is shaped, and standard string spacing is notched. These are not guaranteed to fit any instrument. G and E-string heights are listed below to aid in selecting the best bridge for your application. An ebony E-string inlay prevents the string from deepening the groove.
The following heights are as measured from the middle of the bottom of each foot to the above G or E string groove, respectively, and generally have tolerances of less than a millimeter:
4/4 Size, High: 33.5mm, 32mm
4/4 Size, Medium: 31.5mm, 30mm
4/4 Size, Low: 30mm, 28.5mm
3/4 Size, Medium: 30.5mm, 28.5mm
1/2 Size, Medium: 28mm, 26mm
1/4 Size, Medium: 28mm, 26mm