40 Items

Filter

Your Selections:

Clear All

40 Items

Kirlin IP202 Instrument Cable - 15 ft

Item# IP202

$12.95

In Stock

High quality pro audio cable from Kirlin.

• Description: ¼” mono plug – ¼” right angle mono plug
• Category: Instrument Cable
• Wire Gauge: 20AWG x 1
• Conductor: OFC
• Shielding: Spiral, 90% coverage
• Jacket OD: 6.5mm
• Jacket Color: Black
• Length: 15 Feet
• 3-Year Manufacturer Warranty

The Realist Woodtone Double Bass Transducer

Item# RBP100W

$219.99

In Stock

Because it's made of wood, the transducer won't mark the top of your instrument. Very transparent sound color, easy to amplify. No need to re-attenuate amp settings between arco and pizzicato. 1/4" input jack. Simple installation with no change to the instrument required.

The Realist Docking Station for Bass

Item# RDS

$89.99

In Stock

Universal volume attenuator that lets you adjust volume on-the-fly, no matter which string bass pickup is installed. No-fuss installation to the tailpiece without fasteners. Simply loosen the strings, mount, tighten.

Shure SM58 Vocal Mic

Item# SM58

$99.00

In Stock

Be heard!

SHAR now carries the classic Shure SM58! Tuned to accentuate the warmth and clarity of lead and back-up vocals, the SM58 is a legendary live vocal microphone known for its rugged reliability on tour, and offers great response for the complex tonal spectrum of stringed instruments.

Handheld microphone ideal for live vocals Dynamic cartridge with cardioid polar pattern. Includes SM58, microphone clip, storage bag, and user guide.

Rapco Horizon Mic Cable Low Impedence

Item# M1-20

$20.00

In Stock

Rapco Horizon Mic Cable High Impedence

Item# AHZ20

$19.99

In Stock

Fishman Platinum Stage Analog Preamp

Item# PROEQS

$149.95

In Stock

Maximize your Sound Potential!

The all-analog Platinum Stage preamp delivers accurate sonic detail for any acoustic instrument. Features include a high-headroom Class-A preamp, 4-band tone control, volume boost switch with level control, 48-volt Phantom Power, Balanced D.I. with pre/post EQ setting, 1/4" instrument input, 1/4" amp output, treble/bass EQ Mode switch, 3-frequency low-cut, and an auto-ground lift. Belt-clip included, 9-volt battery required (not included), optional AC power adapter available (not included).

Horizon Instrument Cable Right Angle - 10 ft

Item# HICR10

$16.99

In Stock

Horizon Instrument Cable Right Angle - 18 ft

Item# HICR18

$20.99

In Stock

HP Lutherie Pickup System for Violin and Viola

Item# VM01

$532.00

In Stock

The same system installed in HP Lutherie’s line of Iris violins, now available for your standard acoustic violin. Easy to install, with no modification of your bridge required. Very accurate tone, very powerful, with extremely high signal-to-noise ratio, eliminating virtually all extraneous noises. Violin/viola preamp circuitry is built into the chinrest – simply remove your current chinrest, and replace with the included chinrest. Cello and bass pickup systems contain the preamp circuitry in a small wood component that mounts on the tailpiece. Kit includes a variety of attachment brackets, to fit most bridges, pickup, extra 12V battery, chinrest wrench, cable, and instructions, all packed into a wood box.

HP Lutherie Pickup System for Cello

Item# CC01

$532.00

In Stock

The same system installed in HP Lutherie’s line of Iris violins, now available for your standard acoustic violin. Easy to install, with no modification of your bridge required. Very accurate tone, very powerful, with extremely high signal-to-noise ratio, eliminating virtually all extraneous noises. Violin/viola preamp circuitry is built into the chinrest – simply remove your current chinrest, and replace with the included chinrest. Cello and bass pickup systems contain the preamp circuitry in a small wood component that mounts on the tailpiece. Kit includes a variety of attachment brackets, to fit most bridges, pickup, extra 12V battery, chinrest wrench, cable, and instructions, all packed into a wood box.

HP Lutherie Pickup System for Bass

Item# CBC01

$532.00

In Stock

The same system installed in HP Lutherie’s line of Iris violins, now available for your standard acoustic violin. Easy to install, with no modification of your bridge required. Very accurate tone, very powerful, with extremely high signal-to-noise ratio, eliminating virtually all extraneous noises. Violin/viola preamp circuitry is built into the chinrest – simply remove your current chinrest, and replace with the included chinrest. Cello and bass pickup systems contain the preamp circuitry in a small wood component that mounts on the tailpiece. Kit includes a variety of attachment brackets, to fit most bridges, pickup, extra 12V battery, chinrest wrench, cable, and instructions, all packed into a wood box.

40 Items

Prev

Page 3 of 4

Next